Vertical Direct Chill (VDC) Casting Machine

We deliver the vertical casting machine together with its moulds in a single project

We build the complete VDC line for billet and slab production: the casting table, pit, water distribution system and hydraulic lowering control come out of a single project. We machine the moulds and water distribution heads specific to each billet diameter in our own workshop in Çayırova, and we also supply the reinforced concrete design of the pit.

Method
Vertical DC
Billet diameter
75 – 300 mm
Mould
Our own manufacture
Control
PLC: speed + water
Data sheet

Vertical casting machine (VDC) technical specifications

Casting method
Vertical direct chill (VDC) casting
Billet diameter
75 – 300 mm
Slab cross-section
Project-specific
Mould table
Multiple mould slots — number of slots depends on diameter and capacity
Moulds and water heads
Made by Gumen; specific to billet diameter
Cooling water
Closed loop; flow rate PLC-controlled
Lifting mechanism
Hydraulic; casting speed is infinitely adjustable
Control
PLC: casting speed, water flow rate, level monitoring
Alloy compatibility
1xxx – 7xxx series
Pit and infrastructure
Reinforced concrete pit design and layout plan included
Ultrasonic test
Optional; integrated into the line
Reference
Lines installed in more than 7 countries

What changes when the mould comes from the same place as the machine?

The fit between the mould, the water distribution head and the table directly determines the cast surface. When these three parts come from different suppliers, finding out which one is out of tolerance takes weeks when a problem appears. Because we machine the moulds to billet diameter ourselves, the adjustment time at first commissioning is shorter, and adding a new diameter later is a single item of work.

Models

We build the same machine for billet and for slab

Main unit

Billet Casting Table

Single-diameter or multi-diameter slots; the number of slots is determined by capacity. The table is sized to the pit opening and the lifting mechanism.

Main unit

Slab Casting Configuration

The section is project-specific. The mould and water distribution are recalculated for the slab width, and the pit depth is designed accordingly.

Additional unit

In-Line Ultrasonic Testing

Automatic scanning after cutting; details are on the Automatic Saw and UT System page. No separate station is installed; it goes inside the line.

Additional unit

Closed-Loop Water System

The cooling water stays in circulation; losses come only from evaporation and blowdown. Tower capacity is selected according to the casting programme.

Spare parts

Mould and Water Head Sets

Spare moulds are also manufactured in our own workshop. There is no waiting for import lead times on a critical part.

Highlights

Four things set this machine apart

A single package, moulds included

Moulds and water distribution heads specific to each billet diameter are machined in our workshop. The casting machine and the mould come from the same place.

We draw up the project starting from the pit

The reinforced concrete pit design, layout plan and mould table installation are part of the same job. No mismatch problems arise on site.

Testing is built into the line

The cut billet is scanned while it is on the line; the result is matched with the casting parameters and archived.

Spare parts sourced domestically

The mould, water head and mechanical assemblies are manufactured in Türkiye. A line that has stopped does not wait for a part at customs.

We answer frequently asked questions
about vertical casting

The table can be prepared for more than one diameter by changing the mould slot layout. As the difference between diameters grows, the water distribution has to be rebalanced; we determine at the project stage which diameter groups will work together.

We supply the reinforced concrete design and the layout plan; the plant carries out the construction work with its own contractor. The mould table and mechanical installation are our responsibility.

Yes, if there is enough distance on the transfer line after cutting, and that includes lines made by other manufacturers. After a site survey, we share in writing what will be added.

In a closed-loop system the water stays in circulation; consumption consists only of evaporation and blowdown losses. The net figure is worked out project by project, according to tower capacity and the casting programme.

Let’s size your line together

Share your diameter list and we will size the table

Which billet diameters do you cast, what is your daily tonnage, and how much space do you have for the pit? With these three pieces of information, we settle the number of slots, the mould set and the pit design together.

Request a Quote

From design to commissioning, we carry out every step with our own team